CNC Machining

• Vertical Milling Centers offer a cost effective approach to machining parts requiring tolerances in the 0.0005 and above range.

• Largest format machines is 64" x 32" x 30"

• High Speed spindles allow tiny features to be machined. In-house fixturing allows us to maintain dimensional repeatability, and be efficient for prototypes to high volume production runs.

CNC Turning/Lathe

• CNC Turning offer a cost effective approach to machining parts that do not require secondary (or minimum) milling requirements and tolerances in the ±0.0005" and above range.
• Our automated processes allow us to effectively produce proto-types and high volume production runs.

luminum Extrusions

• Maximum Extrusion up to 28” Wide & 40 lbs/foot;
• Heatsink Aspect Ratios Up to 22:1;
• Thin Wall Profiles, Hollows, Semi-Hollows & Solids. Stock Profiles;
• Minimums from 100 lbs
• Heatsinks & Non-Heatsink Shapes
• DFARS Compliant Material - Aluminum
• Alloys: 1060, 6061, 6063, and other 6000 series, 5000 Series and 7000 series.
• Post Extrusion Fabrication

Screw Machine & Hardware

• Swiss-type , Multi-Axis Machines with 3 to 10 Axis Configurations allow for turning, milling and back turning operations to be completed on same machine in one cycle.
• Ideal for small parts and for long slender parts which would deflect or vibrate when turning on a traditional CNC lathe.
• Able to produce parts from 0.010 to 1.25" diameters with tolerances up to ±0.0001"
• Production from prototypes to millions of pieces.